MS-Hardmesh is woven with 30% higher tensile strength wires than BS-Standard to meet Screen Printing demands such as high dimensional accuracy and screen mask longevity.
We were successful in developing 640 or 730 mesh, which are mainly used in MLCC industries.
It is also appropriate for fine line printing and used for drawing 30 micron electrode lines in Touch Panel application.

Product Range
SPEC MESH COUNT WIRE DIA. (mm) OPENING RATE THICKNESS (µm) STRENGTH INDEX
Normal Calender
SOFT MIDDLE HEAVY
MS-730/13 730 0.013 40% 28 ± 2 20 ± 1 18 ± 1 15 ± 1 0.63
MS-640/15 640 0.015 39% 35 ± 2 25 ± 1 21 ± 1 17 ± 1 0.73
MS-500/16 500 0.016 47% 36 ± 2 25 ± 2 20 ± 1 15 ± 1 0.65
MS-500/19 500 0.019 39% 41 ± 2 36 ± 2 25 ± 1 20 ± 1 0.93
MS-400/19 400 0.019 49% 42 ± 2 30 ± 2 23 ± 1 18 ± 1 0.74
MS-400/23 400 0.023 41% 55 ± 2 40 ± 1 35 ± 1 26 ± 1 1.08
MS-325/24 325 0.024 48% 51 ± 2 44 ± 2 38 ± 2 25 ± 2 0.96
MS-325/28 325 0.028 41% 56 ± 2 51 ± 2 45 ± 2 39 ± 2 1.30
MS-250/30 250 0.030 50% 62 ± 2 58 ± 2 45 ± 2 28 ± 1 1.15