Cross Section View
SEM Image

Using 25% higher tensile strength than standard SUS304, Standard – BS is our standard product which is adopted for wide use such as 100 micron fine line or thin deposit printing for MLCC.
It is also used for sieving and filtration industries.

Product Range
SPEC MESH COUNT WIRE DIA. (mm) OPENING RATE THICKNESS (µm) STRENGTH INDEX
Normal Calender
SOFT MIDDLE HEAVY
BS-500/16 500 0.016 47% 36 ± 2 25 ± 2 20 ± 1 16 ± 1 0.50
BS-500/19 500 0.019 39% 41 ± 2 30 ± 2 25 ± 1 19 ± 1 0.71
BS-400/19 400 0.019 49% 39 ± 2 34 ± 2 30 ± 1 23 ± 1 0.57
BS-400/23 400 0.023 41% 55 ± 2 40 ± 2 35 ± 1 25 ± 1 0.83
BS-400/25 400 0.025 37% 57 ± 2 49 ± 2 40 ± 1 30 ± 1 0.98
★BS-325/28 325 0.028 41% 62 ± 2 55 ± 2 47 ± 1 40 ± 1 1.00
BS-325/30 325 0.030 38% 62 ± 2 60 ± 2 47 ± 2 42 ± 1 1.15
BS-300/30 300 0.030 42% 68 ± 2 59 ± 2 50 ± 2 45 ± 1 1.06
BS-270/35 270 0.035 39% 77 ± 2 70 ± 2 58 ± 2 40 ± 2 1.30
BS-250/30 250 0.030 50% 62 ± 2 58 ± 2 50 ± 2 45 ± 2 0.88
★ BS-250/35 250 0.035 43% 78 ± 2 64 ± 2 57 ± 2 55 ± 2 1.20
BS-250/40 250 0.040 37% 90 ± 3 86 ± 2 72 ± 2 67 ± 2 1.57
★ BS-200/40 200 0.040 47% 82 ± 3 77 ± 2 72 ± 2 63 ± 2 1.26